Dampers

Bansbach Motion Control (MC) Dampers are used as a motion control function to safely dampen (delay) speed and slow down masses.

MC-dampers is the generic term for special, delaying (damping) easylift products which can be used for many different safety and operating functions.
Easylift MC-dampers slow down masses or dampen speed according to the size (they are not shock-, impact absorbers, or limit stop dampers).

• Adjustable MC Dampers - If different or not clearly defined damping intensities are required, we recommend the use of adjustable easylift MC-dampers.
  The damping speed can be adjusted when the damper is mounted.
• Standard MC Damper - This specification with damping over the complete stroke contains only oil. Due to the construction, there will be a small free travel when the piston rod is pulled out. The push-in and push-out speed – i.e. the effective slowing down (motion control) of the movement of a mass – can be influenced considerably by the use of different nozzles as well as by different oil viscosities.
• MC Damper with floating piston - If the installation is horizontal or undefined, the free movement of the standard specification can be inconvenient. Therefore, the easylift system also provides a damping variety with floating piston. The separation of the oil- and gas chamber guarantees a smooth damping movement in every required position. For the stabilization of the floating piston, it must be pressurized by at least 20N. Depending on the position of the floating piston, the damper can be installed stable either in push- or in pull direction.
• MC Damper without free travel - This easylift damping variety allows a controlled damping in both directions, without a free travel effect. Here, the piston moves completely in a fixed oil chamber. The piston rod volume doesn’t influence the oil chamber neither with pushed-in nor with pushed-out piston rod.